USB2312A v.1.1
USB3.2 Gen2 Enhanced SuperSpeed Dual ports PCI Express Host Card with Type-A Receptacle
- PCI Express Base Specification Revision 3.0 dual-lane (x2).
- Support PCIe L1 substate and CLK REQ# for advanced power management.
- Compliant with Universal Serial Bus 3.2 specification Gen2.
- Compliant with xHCI (eXtensible Host Controller Interface) specifications Revision 1.1.
- Supports simultaneous operation of multiple USB3.2 Gen2/1, USB 2.0 and USB1.1 devices.
- Supports USB data transfer rate of 10G/5G/480/12/1.5 Mbps.
- Expands dual external USB3.2 Gen2 Super-Speed plus Type-A ports on the system.
- Each USB port supplies maximum +5VDC / 1500mA power output to USB device.
- Built-in over current protection on each USB port.
- Hot-swapping feature allows connect/disconnect device without powering down the system.
- Driver supports for Microsoft Windows 7, 8.x and 10,11 operation systems.
- Certified by Electromagnetic Compatibility (CE, FCC, VCCI, BSMI) and RoHS approval.
Introduction
SUNIX USB2312A is a dual-port Super-Speed USB3.2 Gen2 PCI Express Add-on card, and it’s compliant with the PCI Express Gen-III Dual-lane (x2) specification for host PC system. It works up to 10 Gbps for data transfer when connecting to USB 3.2 Gen2 compliant peripherals, while maintaining compatibility with existing USB peripheral devices. USB3.2 Gen2 performance is 2 times faster than USB3.0 and 20 times faster than USB2.0 connectivity. With SUNIX unique technology, it can output efficient power to USB device without additional power adapter connection. SUNIX USB2312A is an ideal choice for external storage devices, MP3 players, external writer, digital cameras, webcam, networking and video devices, and all other USB devices.
Specifications
Hardware
| BUS | PCI Express Spec 3.0, Dual-Lane (x2) | ||
| Controller | PCI Express USB 3.2 Gen2 Host controller, Asmedia ASM3142 | ||
| USB Standard | eXtensible Host Controller Interface (xHCI) Rev1.1 | ||
| IRQ & IO | Assigned by System | ||
USB Communication
| Interface | Universal Serial Bus 3.2 Gen2 / 1, USB 2.0 / 1.1 |
| Speed | SuperSpeed+(10Gbps), SuperSpeed(5Gbps), High Speed (480Mbps), Full Speed (12Mbps), Low Speed (1.5Mbps) |
| No. of Port | 2-port |
| PCB Connector | USB3.2 Gen2 USB Type-A port |
| Protection |
±15KV IEC61000-4-2 Air Gap Discharge ±8KV IEC61000-4-2 Contact Discharge |
Power
| Source | PCIe Bus Power |
| Output Capacity |
USB Type-A Port: +5VDC / Maximum 0.9A / each port Note: Total power output capacity will be limited by system power supply. |
| Over Current Protection |
USB Type-A Port: +5VDC / 1.5A / each port / Power switch |
| Power Consumption | 1.1 W @ 3.3V (board only without power output to USB device) |
Driver Support
| Windows | Windows 7 / 8.x / 10 (X86/X64)/ 11 (Windows in-box driver) |
| Linux | Linux 2.6.31 or later (Linux OS already implemented USB 3.0 driver) |
Environment
| Operation Temperature | 0 to 60°C (32 to 140°F) |
| Operation Humidity | 5 to 95% RH |
| Storage Temperature | -20 to 70°C (-4 to 158°F) |
Regulatory Approvals
| EMC | CE, FCC, VCCI, BSMI |
| Green | RoHS, CRoHS, WEEE |
Physical Characteristics
| PCB Dimension | 79.3 x 68.5 mm |
| Bracket | Standard 120 mm (Low Profile 80mm) |
| Bracket Space | 1 |
Support
Download Datasheet
| Datasheet | USB2312A v.1.1 Datasheet |
|
Download Guide
| Guide | USB2312A v.1.1 Quick Installation Guide |
|
USB2312A v.1.1
USB3.2 Gen2 Enhanced SuperSpeed Dual ports PCI Express Host Card with Type-A Receptacle
- PCI Express Base Specification Revision 3.0 dual-lane (x2).
- Support PCIe L1 substate and CLK REQ# for advanced power management.
- Compliant with Universal Serial Bus 3.2 specification Gen2.
- Compliant with xHCI (eXtensible Host Controller Interface) specifications Revision 1.1.
- Supports simultaneous operation of multiple USB3.2 Gen2/1, USB 2.0 and USB1.1 devices.
- Supports USB data transfer rate of 10G/5G/480/12/1.5 Mbps.
- Expands dual external USB3.2 Gen2 Super-Speed plus Type-A ports on the system.
- Each USB port supplies maximum +5VDC / 1500mA power output to USB device.
- Built-in over current protection on each USB port.
- Hot-swapping feature allows connect/disconnect device without powering down the system.
- Driver supports for Microsoft Windows 7, 8.x and 10,11 operation systems.
- Certified by Electromagnetic Compatibility (CE, FCC, VCCI, BSMI) and RoHS approval.
Introduction
SUNIX USB2312A is a dual-port Super-Speed USB3.2 Gen2 PCI Express Add-on card, and it’s compliant with the PCI Express Gen-III Dual-lane (x2) specification for host PC system. It works up to 10 Gbps for data transfer when connecting to USB 3.2 Gen2 compliant peripherals, while maintaining compatibility with existing USB peripheral devices. USB3.2 Gen2 performance is 2 times faster than USB3.0 and 20 times faster than USB2.0 connectivity. With SUNIX unique technology, it can output efficient power to USB device without additional power adapter connection. SUNIX USB2312A is an ideal choice for external storage devices, MP3 players, external writer, digital cameras, webcam, networking and video devices, and all other USB devices.
Specifications
Hardware
| BUS | PCI Express Spec 3.0, Dual-Lane (x2) | ||
| Controller | PCI Express USB 3.2 Gen2 Host controller, Asmedia ASM3142 | ||
| USB Standard | eXtensible Host Controller Interface (xHCI) Rev1.1 | ||
| IRQ & IO | Assigned by System | ||
USB Communication
| Interface | Universal Serial Bus 3.2 Gen2 / 1, USB 2.0 / 1.1 |
| Speed | SuperSpeed+(10Gbps), SuperSpeed(5Gbps), High Speed (480Mbps), Full Speed (12Mbps), Low Speed (1.5Mbps) |
| No. of Port | 2-port |
| PCB Connector | USB3.2 Gen2 USB Type-A port |
| Protection |
±15KV IEC61000-4-2 Air Gap Discharge ±8KV IEC61000-4-2 Contact Discharge |
Power
| Source | PCIe Bus Power |
| Output Capacity |
USB Type-A Port: +5VDC / Maximum 0.9A / each port Note: Total power output capacity will be limited by system power supply. |
| Over Current Protection |
USB Type-A Port: +5VDC / 1.5A / each port / Power switch |
| Power Consumption | 1.1 W @ 3.3V (board only without power output to USB device) |
Driver Support
| Windows | Windows 7 / 8.x / 10 (X86/X64)/ 11 (Windows in-box driver) |
| Linux | Linux 2.6.31 or later (Linux OS already implemented USB 3.0 driver) |
Environment
| Operation Temperature | 0 to 60°C (32 to 140°F) |
| Operation Humidity | 5 to 95% RH |
| Storage Temperature | -20 to 70°C (-4 to 158°F) |
Regulatory Approvals
| EMC | CE, FCC, VCCI, BSMI |
| Green | RoHS, CRoHS, WEEE |
Physical Characteristics
| PCB Dimension | 79.3 x 68.5 mm |
| Bracket | Standard 120 mm (Low Profile 80mm) |
| Bracket Space | 1 |
Support
Download Datasheet
| Datasheet | USB2312A v.1.1 Datasheet |
|
Download Guide
| Guide | USB2312A v.1.1 Quick Installation Guide |
|
USB2312A v.1.1
USB3.2 Gen2 Enhanced SuperSpeed Dual ports PCI Express Host Card with Type-A Receptacle
- PCI Express Base Specification Revision 3.0 dual-lane (x2).
- Support PCIe L1 substate and CLK REQ# for advanced power management.
- Compliant with Universal Serial Bus 3.2 specification Gen2.
- Compliant with xHCI (eXtensible Host Controller Interface) specifications Revision 1.1.
- Supports simultaneous operation of multiple USB3.2 Gen2/1, USB 2.0 and USB1.1 devices.
- Supports USB data transfer rate of 10G/5G/480/12/1.5 Mbps.
- Expands dual external USB3.2 Gen2 Super-Speed plus Type-A ports on the system.
- Each USB port supplies maximum +5VDC / 1500mA power output to USB device.
- Built-in over current protection on each USB port.
- Hot-swapping feature allows connect/disconnect device without powering down the system.
- Driver supports for Microsoft Windows 7, 8.x and 10,11 operation systems.
- Certified by Electromagnetic Compatibility (CE, FCC, VCCI, BSMI) and RoHS approval.
Introduction
SUNIX USB2312A is a dual-port Super-Speed USB3.2 Gen2 PCI Express Add-on card, and it’s compliant with the PCI Express Gen-III Dual-lane (x2) specification for host PC system. It works up to 10 Gbps for data transfer when connecting to USB 3.2 Gen2 compliant peripherals, while maintaining compatibility with existing USB peripheral devices. USB3.2 Gen2 performance is 2 times faster than USB3.0 and 20 times faster than USB2.0 connectivity. With SUNIX unique technology, it can output efficient power to USB device without additional power adapter connection. SUNIX USB2312A is an ideal choice for external storage devices, MP3 players, external writer, digital cameras, webcam, networking and video devices, and all other USB devices.
Specifications
Hardware
| BUS | PCI Express Spec 3.0, Dual-Lane (x2) | ||
| Controller | PCI Express USB 3.2 Gen2 Host controller, Asmedia ASM3142 | ||
| USB Standard | eXtensible Host Controller Interface (xHCI) Rev1.1 | ||
| IRQ & IO | Assigned by System | ||
USB Communication
| Interface | Universal Serial Bus 3.2 Gen2 / 1, USB 2.0 / 1.1 |
| Speed | SuperSpeed+(10Gbps), SuperSpeed(5Gbps), High Speed (480Mbps), Full Speed (12Mbps), Low Speed (1.5Mbps) |
| No. of Port | 2-port |
| PCB Connector | USB3.2 Gen2 USB Type-A port |
| Protection |
±15KV IEC61000-4-2 Air Gap Discharge ±8KV IEC61000-4-2 Contact Discharge |
Power
| Source | PCIe Bus Power |
| Output Capacity |
USB Type-A Port: +5VDC / Maximum 0.9A / each port Note: Total power output capacity will be limited by system power supply. |
| Over Current Protection |
USB Type-A Port: +5VDC / 1.5A / each port / Power switch |
| Power Consumption | 1.1 W @ 3.3V (board only without power output to USB device) |
Driver Support
| Windows | Windows 7 / 8.x / 10 (X86/X64)/ 11 (Windows in-box driver) |
| Linux | Linux 2.6.31 or later (Linux OS already implemented USB 3.0 driver) |
Environment
| Operation Temperature | 0 to 60°C (32 to 140°F) |
| Operation Humidity | 5 to 95% RH |
| Storage Temperature | -20 to 70°C (-4 to 158°F) |
Regulatory Approvals
| EMC | CE, FCC, VCCI, BSMI |
| Green | RoHS, CRoHS, WEEE |
Physical Characteristics
| PCB Dimension | 79.3 x 68.5 mm |
| Bracket | Standard 120 mm (Low Profile 80mm) |
| Bracket Space | 1 |
Support
Download Datasheet
| Datasheet | USB2312A v.1.1 Datasheet |
|
Download Guide
| Guide | USB2312A v.1.1 Quick Installation Guide |
|
USB2312A v.1.1
USB3.2 Gen2 Enhanced SuperSpeed Dual ports PCI Express Host Card with Type-A Receptacle
- PCI Express Base Specification Revision 3.0 dual-lane (x2).
- Support PCIe L1 substate and CLK REQ# for advanced power management.
- Compliant with Universal Serial Bus 3.2 specification Gen2.
- Compliant with xHCI (eXtensible Host Controller Interface) specifications Revision 1.1.
- Supports simultaneous operation of multiple USB3.2 Gen2/1, USB 2.0 and USB1.1 devices.
- Supports USB data transfer rate of 10G/5G/480/12/1.5 Mbps.
- Expands dual external USB3.2 Gen2 Super-Speed plus Type-A ports on the system.
- Each USB port supplies maximum +5VDC / 1500mA power output to USB device.
- Built-in over current protection on each USB port.
- Hot-swapping feature allows connect/disconnect device without powering down the system.
- Driver supports for Microsoft Windows 7, 8.x and 10,11 operation systems.
- Certified by Electromagnetic Compatibility (CE, FCC, VCCI, BSMI) and RoHS approval.
SUNIX USB2312A is a dual-port Super-Speed USB3.2 Gen2 PCI Express Add-on card, and it’s compliant with the PCI Express Gen-III Dual-lane (x2) specification for host PC system. It works up to 10 Gbps for data transfer when connecting to USB 3.2 Gen2 compliant peripherals, while maintaining compatibility with existing USB peripheral devices. USB3.2 Gen2 performance is 2 times faster than USB3.0 and 20 times faster than USB2.0 connectivity. With SUNIX unique technology, it can output efficient power to USB device without additional power adapter connection. SUNIX USB2312A is an ideal choice for external storage devices, MP3 players, external writer, digital cameras, webcam, networking and video devices, and all other USB devices.
Introduction
SUNIX USB2312A is a dual-port Super-Speed USB3.2 Gen2 PCI Express Add-on card, and it’s compliant with the PCI Express Gen-III Dual-lane (x2) specification for host PC system. It works up to 10 Gbps for data transfer when connecting to USB 3.2 Gen2 compliant peripherals, while maintaining compatibility with existing USB peripheral devices. USB3.2 Gen2 performance is 2 times faster than USB3.0 and 20 times faster than USB2.0 connectivity. With SUNIX unique technology, it can output efficient power to USB device without additional power adapter connection. SUNIX USB2312A is an ideal choice for external storage devices, MP3 players, external writer, digital cameras, webcam, networking and video devices, and all other USB devices.
Specifications
Hardware
| BUS | PCI Express Spec 3.0, Dual-Lane (x2) | ||
| Controller | PCI Express USB 3.2 Gen2 Host controller, Asmedia ASM3142 | ||
| USB Standard | eXtensible Host Controller Interface (xHCI) Rev1.1 | ||
| IRQ & IO | Assigned by System | ||
USB Communication
| Interface | Universal Serial Bus 3.2 Gen2 / 1, USB 2.0 / 1.1 |
| Speed | SuperSpeed+(10Gbps), SuperSpeed(5Gbps), High Speed (480Mbps), Full Speed (12Mbps), Low Speed (1.5Mbps) |
| No. of Port | 2-port |
| PCB Connector | USB3.2 Gen2 USB Type-A port |
| Protection |
±15KV IEC61000-4-2 Air Gap Discharge ±8KV IEC61000-4-2 Contact Discharge |
Power
| Source | PCIe Bus Power |
| Output Capacity |
USB Type-A Port: +5VDC / Maximum 0.9A / each port Note: Total power output capacity will be limited by system power supply. |
| Over Current Protection |
USB Type-A Port: +5VDC / 1.5A / each port / Power switch |
| Power Consumption | 1.1 W @ 3.3V (board only without power output to USB device) |
Driver Support
| Windows | Windows 7 / 8.x / 10 (X86/X64)/ 11 (Windows in-box driver) |
| Linux | Linux 2.6.31 or later (Linux OS already implemented USB 3.0 driver) |
Environment
| Operation Temperature | 0 to 60°C (32 to 140°F) |
| Operation Humidity | 5 to 95% RH |
| Storage Temperature | -20 to 70°C (-4 to 158°F) |
Regulatory Approvals
| EMC | CE, FCC, VCCI, BSMI |
| Green | RoHS, CRoHS, WEEE |
Physical Characteristics
| PCB Dimension | 79.3 x 68.5 mm |
| Bracket | Standard 120 mm (Low Profile 80mm) |
| Bracket Space | 1 |
Support
Download Datasheet
| Datasheet | USB2312A v.1.1 Datasheet |
|
Download Guide
| Guide | USB2312A v.1.1 Quick Installation Guide |
|
