DPAD02HTP
Serial DevicePort Ethernet to 2-port RS-422/485 Serial
- Expands 2 independent RS-422/485 serial port over Ethernet networking
- Built-in SUNIX DevicePort DPL2000Q High-Performance Ethernet-UART controller
- SUNIX DevicePort proprietary Ethernet I/O Redirection Technology
-
- Serial communication with real time data transmit and receive
- Physical COM port accessible via Windows Device Manager
- Up to 255 COM ports can be setup on a windows system simultaneously - Accessing Legacy COM port by using existing software and application
- Flexible port configuration with DevicePort on/off-line Smart COM deployment
-
- Keeps physical COM port in system when DevicePort under off-line mode
- Serial signal staging until DevicePort recovery back to on-line mode - Built-in single 10/100 Ethernet ports for Ethernet cascading capability
- Support Wall Mounting & DIN-rail Mounting Installation.
Introduction
DPAD02HTP allows users to expand 2 RS-422/485 port over Ethernet connection, and it works on any windows based desktop, thin client, laptop, All-in-one, and tablet PC computers. With SUNIX DPL2000Q High-Performance Ethernet-UART controller and exclusive I/O Redirection Technology, DevicePort creates physical COM ports that support real time data communication, Smart COM on/off-line deployment, and Ethernet-COM port hot-plug capability; user can expand RS-422/485 COM port easily without complex software configuration. SUNIX DevicePort improves solution deployment efficiency to achieve greater reliability in commercial and industrial automation applications.
Specifications
Serial Communication
| Interface | RS-422/485 |
| Controller | SUNIX DPL2000Q |
| BUS | Ethernet |
| No. of Port | 2-port |
| FIFO | 1Kbyte Hardware / per port |
| Baud rate | 50 bps ~921.6 Kbps |
| Stop bit | 1, 1.5, 2 |
| Parity | even, odd, none, mark, space |
| Flow Control | Xon/Xoff (software control) RTS/CTS (hardware control) |
| Connector | Terminal block |
| Signal |
RS422: TxD+, TxD-, RxD+, RxD-, GND RS485: Data+, Data-, GND |
| Protection |
±8KV ESD IEC 61000-4-2 air discharge ±4KV ESD IEC 61000-4-2 contact discharge |
Software
| Driver support |
Microsoft Client: Windows 7 / 8.1 / 10 /11 (x86/x64) Microsoft Servers: Windows Server 2008 / 2012R2 (x64) |
Ethernet Communication
| Number of Ports | Dual Ethernet ports |
| Speed | 10/100 Mbps, auto MDI/MDIX |
| Connector | RJ45 |
| Electromagnetic shielding protection | Built-in 1.5K |
Power Requirements
| Input Voltage | 12~24VDC |
| Power Consumption | 1.2W@24VDC |
| Connector | Terminal connector |
Certifications
| Hardware | CE, FCC, VCCI, BSMI |
Environment
| Operation Temperature | -25 to 70°C (-13 to 158°F) |
| Operation Humidity | 5 to 95% RH (non-condensing) |
| Storage Temperature | -30 to 75°C (-22 to 167°F) |
Physical Characteristics
| Housing | ABS, PC |
| Weight | 118 g |
| Dimensions | 72.1 x 108.78 x 33.7(mm) / 2.84 x 4.28 x 1.3(inch) |
Support
Download Datasheet
| Datasheet | DPAD02HTP Datasheet |
|
Download Guide
| Guide | DPAXXHTP Series QIG |
|
Download Driver
| Driver | DevicePortAdvanced V4.0.6.0_20220601 | |
| Version | Ver 4.0.6.0 | |
| Update | 2022-06-06 16:12:01 | |
| Size | 5.5MB | |
| OS |
Windows 11 64bit
Windows 10 32/64 bit
Windows 8.1 32/64 bit
Windows 7 SP1 32/64 bit
|
| API | EAZINET API V1.0.5.0 | |
| Version | V1.0.5.0 | |
| Update | 2022-04-15 17:22:45 | |
| Size | 5.4MB | |
| OS |
Windows 11 64bit
Windows 10 32/64 bit
Windows 8.1 32/64 bit
Windows 7 SP1 32/64 bit
|
| Driver | Linux TTY Driver Ver 1.0.15.0 | |
| Version | Ver 1.0.15.0 | |
| Update | 2019-09-16 15:21:59 | |
| Size | 2MB | |
| OS |
CentOS7.0
Ubuntu 11.10
Ubuntu 12.04
Ubuntu 13.10
Ubuntu 14.04
Ubuntu 14.10
Ubuntu 15.04
Ubuntu 15.10
Ubuntu 16.04
|
DPAD02HTP
Serial DevicePort Ethernet to 2-port RS-422/485 Serial
- Expands 2 independent RS-422/485 serial port over Ethernet networking
- Built-in SUNIX DevicePort DPL2000Q High-Performance Ethernet-UART controller
- SUNIX DevicePort proprietary Ethernet I/O Redirection Technology
-
- Serial communication with real time data transmit and receive
- Physical COM port accessible via Windows Device Manager
- Up to 255 COM ports can be setup on a windows system simultaneously - Accessing Legacy COM port by using existing software and application
- Flexible port configuration with DevicePort on/off-line Smart COM deployment
-
- Keeps physical COM port in system when DevicePort under off-line mode
- Serial signal staging until DevicePort recovery back to on-line mode - Built-in single 10/100 Ethernet ports for Ethernet cascading capability
- Support Wall Mounting & DIN-rail Mounting Installation.
Introduction
DPAD02HTP allows users to expand 2 RS-422/485 port over Ethernet connection, and it works on any windows based desktop, thin client, laptop, All-in-one, and tablet PC computers. With SUNIX DPL2000Q High-Performance Ethernet-UART controller and exclusive I/O Redirection Technology, DevicePort creates physical COM ports that support real time data communication, Smart COM on/off-line deployment, and Ethernet-COM port hot-plug capability; user can expand RS-422/485 COM port easily without complex software configuration. SUNIX DevicePort improves solution deployment efficiency to achieve greater reliability in commercial and industrial automation applications.
Specifications
Serial Communication
| Interface | RS-422/485 |
| Controller | SUNIX DPL2000Q |
| BUS | Ethernet |
| No. of Port | 2-port |
| FIFO | 1Kbyte Hardware / per port |
| Baud rate | 50 bps ~921.6 Kbps |
| Stop bit | 1, 1.5, 2 |
| Parity | even, odd, none, mark, space |
| Flow Control | Xon/Xoff (software control) RTS/CTS (hardware control) |
| Connector | Terminal block |
| Signal |
RS422: TxD+, TxD-, RxD+, RxD-, GND RS485: Data+, Data-, GND |
| Protection |
±8KV ESD IEC 61000-4-2 air discharge ±4KV ESD IEC 61000-4-2 contact discharge |
Software
| Driver support |
Microsoft Client: Windows 7 / 8.1 / 10 /11 (x86/x64) Microsoft Servers: Windows Server 2008 / 2012R2 (x64) |
Ethernet Communication
| Number of Ports | Dual Ethernet ports |
| Speed | 10/100 Mbps, auto MDI/MDIX |
| Connector | RJ45 |
| Electromagnetic shielding protection | Built-in 1.5K |
Power Requirements
| Input Voltage | 12~24VDC |
| Power Consumption | 1.2W@24VDC |
| Connector | Terminal connector |
Certifications
| Hardware | CE, FCC, VCCI, BSMI |
Environment
| Operation Temperature | -25 to 70°C (-13 to 158°F) |
| Operation Humidity | 5 to 95% RH (non-condensing) |
| Storage Temperature | -30 to 75°C (-22 to 167°F) |
Physical Characteristics
| Housing | ABS, PC |
| Weight | 118 g |
| Dimensions | 72.1 x 108.78 x 33.7(mm) / 2.84 x 4.28 x 1.3(inch) |
Support
Download Datasheet
| Datasheet | DPAD02HTP Datasheet |
|
Download Guide
| Guide | DPAXXHTP Series QIG |
|
Download Driver
| Driver | DevicePortAdvanced V4.0.6.0_20220601 | |
| Version | Ver 4.0.6.0 | |
| Update | 2022-06-06 16:12:01 | |
| Size | 5.5MB | |
| OS |
Windows 11 64bit
Windows 10 32/64 bit
Windows 8.1 32/64 bit
Windows 7 SP1 32/64 bit
|
| API | EAZINET API V1.0.5.0 | |
| Version | V1.0.5.0 | |
| Update | 2022-04-15 17:22:45 | |
| Size | 5.4MB | |
| OS |
Windows 11 64bit
Windows 10 32/64 bit
Windows 8.1 32/64 bit
Windows 7 SP1 32/64 bit
|
| Driver | Linux TTY Driver Ver 1.0.15.0 | |
| Version | Ver 1.0.15.0 | |
| Update | 2019-09-16 15:21:59 | |
| Size | 2MB | |
| OS |
CentOS7.0
Ubuntu 11.10
Ubuntu 12.04
Ubuntu 13.10
Ubuntu 14.04
Ubuntu 14.10
Ubuntu 15.04
Ubuntu 15.10
Ubuntu 16.04
|
DPAD02HTP
Serial DevicePort Ethernet to 2-port RS-422/485 Serial
- Expands 2 independent RS-422/485 serial port over Ethernet networking
- Built-in SUNIX DevicePort DPL2000Q High-Performance Ethernet-UART controller
- SUNIX DevicePort proprietary Ethernet I/O Redirection Technology
-
- Serial communication with real time data transmit and receive
- Physical COM port accessible via Windows Device Manager
- Up to 255 COM ports can be setup on a windows system simultaneously - Accessing Legacy COM port by using existing software and application
- Flexible port configuration with DevicePort on/off-line Smart COM deployment
-
- Keeps physical COM port in system when DevicePort under off-line mode
- Serial signal staging until DevicePort recovery back to on-line mode - Built-in single 10/100 Ethernet ports for Ethernet cascading capability
- Support Wall Mounting & DIN-rail Mounting Installation.
Introduction
DPAD02HTP allows users to expand 2 RS-422/485 port over Ethernet connection, and it works on any windows based desktop, thin client, laptop, All-in-one, and tablet PC computers. With SUNIX DPL2000Q High-Performance Ethernet-UART controller and exclusive I/O Redirection Technology, DevicePort creates physical COM ports that support real time data communication, Smart COM on/off-line deployment, and Ethernet-COM port hot-plug capability; user can expand RS-422/485 COM port easily without complex software configuration. SUNIX DevicePort improves solution deployment efficiency to achieve greater reliability in commercial and industrial automation applications.
Specifications
Serial Communication
| Interface | RS-422/485 |
| Controller | SUNIX DPL2000Q |
| BUS | Ethernet |
| No. of Port | 2-port |
| FIFO | 1Kbyte Hardware / per port |
| Baud rate | 50 bps ~921.6 Kbps |
| Stop bit | 1, 1.5, 2 |
| Parity | even, odd, none, mark, space |
| Flow Control | Xon/Xoff (software control) RTS/CTS (hardware control) |
| Connector | Terminal block |
| Signal |
RS422: TxD+, TxD-, RxD+, RxD-, GND RS485: Data+, Data-, GND |
| Protection |
±8KV ESD IEC 61000-4-2 air discharge ±4KV ESD IEC 61000-4-2 contact discharge |
Software
| Driver support |
Microsoft Client: Windows 7 / 8.1 / 10 /11 (x86/x64) Microsoft Servers: Windows Server 2008 / 2012R2 (x64) |
Ethernet Communication
| Number of Ports | Dual Ethernet ports |
| Speed | 10/100 Mbps, auto MDI/MDIX |
| Connector | RJ45 |
| Electromagnetic shielding protection | Built-in 1.5K |
Power Requirements
| Input Voltage | 12~24VDC |
| Power Consumption | 1.2W@24VDC |
| Connector | Terminal connector |
Certifications
| Hardware | CE, FCC, VCCI, BSMI |
Environment
| Operation Temperature | -25 to 70°C (-13 to 158°F) |
| Operation Humidity | 5 to 95% RH (non-condensing) |
| Storage Temperature | -30 to 75°C (-22 to 167°F) |
Physical Characteristics
| Housing | ABS, PC |
| Weight | 118 g |
| Dimensions | 72.1 x 108.78 x 33.7(mm) / 2.84 x 4.28 x 1.3(inch) |
Support
Download Datasheet
| Datasheet | DPAD02HTP Datasheet |
|
Download Guide
| Guide | DPAXXHTP Series QIG |
|
Download Driver
| Driver | DevicePortAdvanced V4.0.6.0_20220601 | |
| Version | Ver 4.0.6.0 | |
| Update | 2022-06-06 16:12:01 | |
| Size | 5.5MB | |
| OS |
Windows 11 64bit
Windows 10 32/64 bit
Windows 8.1 32/64 bit
Windows 7 SP1 32/64 bit
|
| API | EAZINET API V1.0.5.0 | |
| Version | V1.0.5.0 | |
| Update | 2022-04-15 17:22:45 | |
| Size | 5.4MB | |
| OS |
Windows 11 64bit
Windows 10 32/64 bit
Windows 8.1 32/64 bit
Windows 7 SP1 32/64 bit
|
| Driver | Linux TTY Driver Ver 1.0.15.0 | |
| Version | Ver 1.0.15.0 | |
| Update | 2019-09-16 15:21:59 | |
| Size | 2MB | |
| OS |
CentOS7.0
Ubuntu 11.10
Ubuntu 12.04
Ubuntu 13.10
Ubuntu 14.04
Ubuntu 14.10
Ubuntu 15.04
Ubuntu 15.10
Ubuntu 16.04
|
DPAD02HTP
Serial DevicePort Ethernet to 2-port RS-422/485 Serial
- Expands 2 independent RS-422/485 serial port over Ethernet networking
- Built-in SUNIX DevicePort DPL2000Q High-Performance Ethernet-UART controller
- SUNIX DevicePort proprietary Ethernet I/O Redirection Technology
-
- Serial communication with real time data transmit and receive
- Physical COM port accessible via Windows Device Manager
- Up to 255 COM ports can be setup on a windows system simultaneously - Accessing Legacy COM port by using existing software and application
- Flexible port configuration with DevicePort on/off-line Smart COM deployment
-
- Keeps physical COM port in system when DevicePort under off-line mode
- Serial signal staging until DevicePort recovery back to on-line mode - Built-in single 10/100 Ethernet ports for Ethernet cascading capability
- Support Wall Mounting & DIN-rail Mounting Installation.
DPAD02HTP allows users to expand 2 RS-422/485 port over Ethernet connection, and it works on any windows based desktop, thin client, laptop, All-in-one, and tablet PC computers. With SUNIX DPL2000Q High-Performance Ethernet-UART controller and exclusive I/O Redirection Technology, DevicePort creates physical COM ports that support real time data communication, Smart COM on/off-line deployment, and Ethernet-COM port hot-plug capability; user can expand RS-422/485 COM port easily without complex software configuration. SUNIX DevicePort improves solution deployment efficiency to achieve greater reliability in commercial and industrial automation applications.
Introduction
DPAD02HTP allows users to expand 2 RS-422/485 port over Ethernet connection, and it works on any windows based desktop, thin client, laptop, All-in-one, and tablet PC computers. With SUNIX DPL2000Q High-Performance Ethernet-UART controller and exclusive I/O Redirection Technology, DevicePort creates physical COM ports that support real time data communication, Smart COM on/off-line deployment, and Ethernet-COM port hot-plug capability; user can expand RS-422/485 COM port easily without complex software configuration. SUNIX DevicePort improves solution deployment efficiency to achieve greater reliability in commercial and industrial automation applications.
Specifications
Serial Communication
| Interface | RS-422/485 |
| Controller | SUNIX DPL2000Q |
| BUS | Ethernet |
| No. of Port | 2-port |
| FIFO | 1Kbyte Hardware / per port |
| Baud rate | 50 bps ~921.6 Kbps |
| Stop bit | 1, 1.5, 2 |
| Parity | even, odd, none, mark, space |
| Flow Control | Xon/Xoff (software control) RTS/CTS (hardware control) |
| Connector | Terminal block |
| Signal |
RS422: TxD+, TxD-, RxD+, RxD-, GND RS485: Data+, Data-, GND |
| Protection |
±8KV ESD IEC 61000-4-2 air discharge ±4KV ESD IEC 61000-4-2 contact discharge |
Software
| Driver support |
Microsoft Client: Windows 7 / 8.1 / 10 /11 (x86/x64) Microsoft Servers: Windows Server 2008 / 2012R2 (x64) |
Ethernet Communication
| Number of Ports | Dual Ethernet ports |
| Speed | 10/100 Mbps, auto MDI/MDIX |
| Connector | RJ45 |
| Electromagnetic shielding protection | Built-in 1.5K |
Power Requirements
| Input Voltage | 12~24VDC |
| Power Consumption | 1.2W@24VDC |
| Connector | Terminal connector |
Certifications
| Hardware | CE, FCC, VCCI, BSMI |
Environment
| Operation Temperature | -25 to 70°C (-13 to 158°F) |
| Operation Humidity | 5 to 95% RH (non-condensing) |
| Storage Temperature | -30 to 75°C (-22 to 167°F) |
Physical Characteristics
| Housing | ABS, PC |
| Weight | 118 g |
| Dimensions | 72.1 x 108.78 x 33.7(mm) / 2.84 x 4.28 x 1.3(inch) |
Support
Download Datasheet
| Datasheet | DPAD02HTP Datasheet |
|
Download Guide
| Guide | DPAXXHTP Series QIG |
|
Download Driver
| Driver | DevicePortAdvanced V4.0.6.0_20220601 | |
| Version | Ver 4.0.6.0 | |
| Update | 2022-06-06 16:12:01 | |
| Size | 5.5MB | |
| OS |
Windows 11 64bit
Windows 10 32/64 bit
Windows 8.1 32/64 bit
Windows 7 SP1 32/64 bit
|
| API | EAZINET API V1.0.5.0 | |
| Version | V1.0.5.0 | |
| Update | 2022-04-15 17:22:45 | |
| Size | 5.4MB | |
| OS |
Windows 11 64bit
Windows 10 32/64 bit
Windows 8.1 32/64 bit
Windows 7 SP1 32/64 bit
|
| Driver | Linux TTY Driver Ver 1.0.15.0 | |
| Version | Ver 1.0.15.0 | |
| Update | 2019-09-16 15:21:59 | |
| Size | 2MB | |
| OS |
CentOS7.0
Ubuntu 11.10
Ubuntu 12.04
Ubuntu 13.10
Ubuntu 14.04
Ubuntu 14.10
Ubuntu 15.04
Ubuntu 15.10
Ubuntu 16.04
|
