USB2312C

USB 3.1 Enhanced SuperSpeed+ 10G 2 ports PCI Express Host Card with Type-C Receptacle
  • PCI Express Base Specification Revision 2.0 & 3.0 Dual-lane ( x2) .
  • Compliant with Universal Serial Bus 3.1 specification Gen2.
  • Compliant with xHCI (eXtensible Host Controller Interface)  Ver.1.1.
  • Supports simultaneous operation of multiple USB 3.1, 3.0,  2.0 and 1.1 devices.
  • Supports USB data transfer rate of 10G/5G/480/12/1.5 Mbps.
  • Expands dual external USB 3.1 Type-C port (DFP) on the system.
  • USB port supplies maximum +5VDC / 1500mA power output to USB device. 
  • Built-in over current protection on each USB port.
  • Hot-swapping feature allows connect/disconnect device without powering down the system.
  • Driver supports for Microsoft Windows 7, 8.x, 10, 11 operation systems.
  • Certified by Electromagnetic Compatibility (CE, FCC, VCCI, BSMI) and RoHS approval.
  • Green Product meets RoHS standard and Low Power consumption.

Introduction

SUNIX USB2312C is a 2 port SuperSpeed+ USB 3.1 PCI Express card, and it’s compliant with the PCI Express Revision 2.0 & 3.0 for host PC system. Based on USB Type-C pure DFP (Downstream Facing Port) mode, it works up to 10 Gbps for data transfer when connecting to USB 3.1 compliant peripherals, while maintaining compatibility with existing USB peripheral devices. USB 3.1 performance is 2 times faster than USB 3.0 and 20 times faster than USB 2.0 connectivity.
 
With USB Type-C Receptacle, SUNIX USB2312C sports reversible plug orientation and cable direction, which means that users will no longer need to be concerned with plug orientation/cable direction, making it easier to plug in. The new connector is smaller and thinner design, but drive higher power output capacity to USB device. SUNIX USB2312C supports 5VDC@1500mA power output to USB device with over current protection on each USB port. This card is an ideal choice for external storage devices, digital cameras, webcam, video devices, and all other USB electronic devices.

Features









Specifications

Hardware

BUS PCI Express Revision 2.0 & 3.0, Dual-Lane (x2)
Controller PCI Express USB 3.1 Host controller, Asmedia ASM3142
USB Standard eXtensible Host Controller Interface (xHCI) Rev1.1
IRQ & IO Assigned by System

USB Communication

Interface Universal Serial Bus 3.1 / 3.0 / 2.0 / 1.1
Speed SuperSpeed+(10Gbps), SuperSpeed(5Gbps), High Speed (480Mbps), Full Speed (12Mbps), Low Speed (1.5Mbps)
No. of Port 2-port
PCB Connector USB 3.1 USB Type-C port (Downstream Facing Port)
Protection ±15KV IEC61000-4-2 Air Gap Discharge
±4KV IEC61000-4-2 Contact Discharge

Power

Source PCI Express bus power
Output Capacity

USB Type-C Port : +5VDC / 1.5A
Note:
* USB Power Delivery Protocol does NOT support.
* Built-in over current protection on each USB port.
* Maximum total power output depends on the capacity of user’s power supply unit

Power Consumption 1.1 W @ 3.3V (board only without power output to USB device)

Driver Support

Windows Windows 7 (X86/X64)
Windows 8.x / 10 (X86/X64)/ 11(Windows in-box driver)
Linux Linux 4.6 or later

Environment

Operation Temperature 0 to 60°C (32 to 140°F)
Operation Humidity 5 to 95% RH
Storage Temperature -20 to 70°C (-4 to 158°F)

Regulatory Approvals

EMC CE, FCC, VCCI, BSMI
Green RoHS, CRoHS, WEEE

Physical Characteristics

PCB Dimension 80 x 68.5 mm
Bracket Standard 120 mm (Low Profile 80mm)
Bracket Space 1

Support

Download Manual

Manual USB2312C User manual
Version V1.0
Update 2016-12-28 16:06:23
Size 1.6MB

Download Datasheet

Datasheet USB2312C Datasheet

Download Driver

Driver USB3.1 Windows Inbox Driver
OS
Windows 11 64bit
Windows 10 32/64 bit
Windows 8.1 32/64 bit
Windows 8.0 32/64 bit
Windows Server 2022 64bit
Windows Server 2019 64bit
Windows Server 2016 64bit
Windows Server 2012 R2 64-bit
Windows Server 2012 64bit
Driver ASMUSBHost_V116541WHQL
Version 1.16.54.1
Update 2019-03-08 14:08:31
Size 11.4MB
OS
Windows 7 SP1 32/64 bit
Windows Server 2008 R2 SP1 64bit
Driver USB3.1 Linux Inbox Driver
OS
Linux 4.6 above

USB2312C

USB 3.1 Enhanced SuperSpeed+ 10G 2 ports PCI Express Host Card with Type-C Receptacle
  • PCI Express Base Specification Revision 2.0 & 3.0 Dual-lane ( x2) .
  • Compliant with Universal Serial Bus 3.1 specification Gen2.
  • Compliant with xHCI (eXtensible Host Controller Interface)  Ver.1.1.
  • Supports simultaneous operation of multiple USB 3.1, 3.0,  2.0 and 1.1 devices.
  • Supports USB data transfer rate of 10G/5G/480/12/1.5 Mbps.
  • Expands dual external USB 3.1 Type-C port (DFP) on the system.
  • USB port supplies maximum +5VDC / 1500mA power output to USB device. 
  • Built-in over current protection on each USB port.
  • Hot-swapping feature allows connect/disconnect device without powering down the system.
  • Driver supports for Microsoft Windows 7, 8.x, 10, 11 operation systems.
  • Certified by Electromagnetic Compatibility (CE, FCC, VCCI, BSMI) and RoHS approval.
  • Green Product meets RoHS standard and Low Power consumption.

Introduction

SUNIX USB2312C is a 2 port SuperSpeed+ USB 3.1 PCI Express card, and it’s compliant with the PCI Express Revision 2.0 & 3.0 for host PC system. Based on USB Type-C pure DFP (Downstream Facing Port) mode, it works up to 10 Gbps for data transfer when connecting to USB 3.1 compliant peripherals, while maintaining compatibility with existing USB peripheral devices. USB 3.1 performance is 2 times faster than USB 3.0 and 20 times faster than USB 2.0 connectivity.
 
With USB Type-C Receptacle, SUNIX USB2312C sports reversible plug orientation and cable direction, which means that users will no longer need to be concerned with plug orientation/cable direction, making it easier to plug in. The new connector is smaller and thinner design, but drive higher power output capacity to USB device. SUNIX USB2312C supports 5VDC@1500mA power output to USB device with over current protection on each USB port. This card is an ideal choice for external storage devices, digital cameras, webcam, video devices, and all other USB electronic devices.

Features









Specifications

Hardware

BUS PCI Express Revision 2.0 & 3.0, Dual-Lane (x2)
Controller PCI Express USB 3.1 Host controller, Asmedia ASM3142
USB Standard eXtensible Host Controller Interface (xHCI) Rev1.1
IRQ & IO Assigned by System

USB Communication

Interface Universal Serial Bus 3.1 / 3.0 / 2.0 / 1.1
Speed SuperSpeed+(10Gbps), SuperSpeed(5Gbps), High Speed (480Mbps), Full Speed (12Mbps), Low Speed (1.5Mbps)
No. of Port 2-port
PCB Connector USB 3.1 USB Type-C port (Downstream Facing Port)
Protection ±15KV IEC61000-4-2 Air Gap Discharge
±4KV IEC61000-4-2 Contact Discharge

Power

Source PCI Express bus power
Output Capacity

USB Type-C Port : +5VDC / 1.5A
Note:
* USB Power Delivery Protocol does NOT support.
* Built-in over current protection on each USB port.
* Maximum total power output depends on the capacity of user’s power supply unit

Power Consumption 1.1 W @ 3.3V (board only without power output to USB device)

Driver Support

Windows Windows 7 (X86/X64)
Windows 8.x / 10 (X86/X64)/ 11(Windows in-box driver)
Linux Linux 4.6 or later

Environment

Operation Temperature 0 to 60°C (32 to 140°F)
Operation Humidity 5 to 95% RH
Storage Temperature -20 to 70°C (-4 to 158°F)

Regulatory Approvals

EMC CE, FCC, VCCI, BSMI
Green RoHS, CRoHS, WEEE

Physical Characteristics

PCB Dimension 80 x 68.5 mm
Bracket Standard 120 mm (Low Profile 80mm)
Bracket Space 1

Support

Download Manual

Manual USB2312C User manual
Version V1.0
Update 2016-12-28 16:06:23
Size 1.6MB

Download Datasheet

Datasheet USB2312C Datasheet

Download Driver

Driver USB3.1 Windows Inbox Driver
OS
Windows 11 64bit
Windows 10 32/64 bit
Windows 8.1 32/64 bit
Windows 8.0 32/64 bit
Windows Server 2022 64bit
Windows Server 2019 64bit
Windows Server 2016 64bit
Windows Server 2012 R2 64-bit
Windows Server 2012 64bit
Driver ASMUSBHost_V116541WHQL
Version 1.16.54.1
Update 2019-03-08 14:08:31
Size 11.4MB
OS
Windows 7 SP1 32/64 bit
Windows Server 2008 R2 SP1 64bit
Driver USB3.1 Linux Inbox Driver
OS
Linux 4.6 above

USB2312C

USB 3.1 Enhanced SuperSpeed+ 10G 2 ports PCI Express Host Card with Type-C Receptacle
  • PCI Express Base Specification Revision 2.0 & 3.0 Dual-lane ( x2) .
  • Compliant with Universal Serial Bus 3.1 specification Gen2.
  • Compliant with xHCI (eXtensible Host Controller Interface)  Ver.1.1.
  • Supports simultaneous operation of multiple USB 3.1, 3.0,  2.0 and 1.1 devices.
  • Supports USB data transfer rate of 10G/5G/480/12/1.5 Mbps.
  • Expands dual external USB 3.1 Type-C port (DFP) on the system.
  • USB port supplies maximum +5VDC / 1500mA power output to USB device. 
  • Built-in over current protection on each USB port.
  • Hot-swapping feature allows connect/disconnect device without powering down the system.
  • Driver supports for Microsoft Windows 7, 8.x, 10, 11 operation systems.
  • Certified by Electromagnetic Compatibility (CE, FCC, VCCI, BSMI) and RoHS approval.
  • Green Product meets RoHS standard and Low Power consumption.

Introduction

SUNIX USB2312C is a 2 port SuperSpeed+ USB 3.1 PCI Express card, and it’s compliant with the PCI Express Revision 2.0 & 3.0 for host PC system. Based on USB Type-C pure DFP (Downstream Facing Port) mode, it works up to 10 Gbps for data transfer when connecting to USB 3.1 compliant peripherals, while maintaining compatibility with existing USB peripheral devices. USB 3.1 performance is 2 times faster than USB 3.0 and 20 times faster than USB 2.0 connectivity.
 
With USB Type-C Receptacle, SUNIX USB2312C sports reversible plug orientation and cable direction, which means that users will no longer need to be concerned with plug orientation/cable direction, making it easier to plug in. The new connector is smaller and thinner design, but drive higher power output capacity to USB device. SUNIX USB2312C supports 5VDC@1500mA power output to USB device with over current protection on each USB port. This card is an ideal choice for external storage devices, digital cameras, webcam, video devices, and all other USB electronic devices.

Features









Specifications

Hardware

BUS PCI Express Revision 2.0 & 3.0, Dual-Lane (x2)
Controller PCI Express USB 3.1 Host controller, Asmedia ASM3142
USB Standard eXtensible Host Controller Interface (xHCI) Rev1.1
IRQ & IO Assigned by System

USB Communication

Interface Universal Serial Bus 3.1 / 3.0 / 2.0 / 1.1
Speed SuperSpeed+(10Gbps), SuperSpeed(5Gbps), High Speed (480Mbps), Full Speed (12Mbps), Low Speed (1.5Mbps)
No. of Port 2-port
PCB Connector USB 3.1 USB Type-C port (Downstream Facing Port)
Protection ±15KV IEC61000-4-2 Air Gap Discharge
±4KV IEC61000-4-2 Contact Discharge

Power

Source PCI Express bus power
Output Capacity

USB Type-C Port : +5VDC / 1.5A
Note:
* USB Power Delivery Protocol does NOT support.
* Built-in over current protection on each USB port.
* Maximum total power output depends on the capacity of user’s power supply unit

Power Consumption 1.1 W @ 3.3V (board only without power output to USB device)

Driver Support

Windows Windows 7 (X86/X64)
Windows 8.x / 10 (X86/X64)/ 11(Windows in-box driver)
Linux Linux 4.6 or later

Environment

Operation Temperature 0 to 60°C (32 to 140°F)
Operation Humidity 5 to 95% RH
Storage Temperature -20 to 70°C (-4 to 158°F)

Regulatory Approvals

EMC CE, FCC, VCCI, BSMI
Green RoHS, CRoHS, WEEE

Physical Characteristics

PCB Dimension 80 x 68.5 mm
Bracket Standard 120 mm (Low Profile 80mm)
Bracket Space 1

Support

Download Manual

Manual USB2312C User manual
Version V1.0
Update 2016-12-28 16:06:23
Size 1.6MB

Download Datasheet

Datasheet USB2312C Datasheet

Download Driver

Driver USB3.1 Windows Inbox Driver
OS
Windows 11 64bit
Windows 10 32/64 bit
Windows 8.1 32/64 bit
Windows 8.0 32/64 bit
Windows Server 2022 64bit
Windows Server 2019 64bit
Windows Server 2016 64bit
Windows Server 2012 R2 64-bit
Windows Server 2012 64bit
Driver ASMUSBHost_V116541WHQL
Version 1.16.54.1
Update 2019-03-08 14:08:31
Size 11.4MB
OS
Windows 7 SP1 32/64 bit
Windows Server 2008 R2 SP1 64bit
Driver USB3.1 Linux Inbox Driver
OS
Linux 4.6 above

USB2312C

USB 3.1 Enhanced SuperSpeed+ 10G 2 ports PCI Express Host Card with Type-C Receptacle
  • PCI Express Base Specification Revision 2.0 & 3.0 Dual-lane ( x2) .
  • Compliant with Universal Serial Bus 3.1 specification Gen2.
  • Compliant with xHCI (eXtensible Host Controller Interface)  Ver.1.1.
  • Supports simultaneous operation of multiple USB 3.1, 3.0,  2.0 and 1.1 devices.
  • Supports USB data transfer rate of 10G/5G/480/12/1.5 Mbps.
  • Expands dual external USB 3.1 Type-C port (DFP) on the system.
  • USB port supplies maximum +5VDC / 1500mA power output to USB device. 
  • Built-in over current protection on each USB port.
  • Hot-swapping feature allows connect/disconnect device without powering down the system.
  • Driver supports for Microsoft Windows 7, 8.x, 10, 11 operation systems.
  • Certified by Electromagnetic Compatibility (CE, FCC, VCCI, BSMI) and RoHS approval.
  • Green Product meets RoHS standard and Low Power consumption.
SUNIX USB2312C is a 2 port SuperSpeed+ USB 3.1 PCI Express card, and it’s compliant with the PCI Express Revision 2.0 & 3.0 for host PC system. Based on USB Type-C pure DFP (Downstream Facing Port) mode, it works up to 10 Gbps for data transfer when connecting to USB 3.1 compliant peripherals, while maintaining compatibility with existing USB peripheral devices. USB 3.1 performance is 2 times faster than USB 3.0 and 20 times faster than USB 2.0 connectivity.
 
With USB Type-C Receptacle, SUNIX USB2312C sports reversible plug orientation and cable direction, which means that users will no longer need to be concerned with plug orientation/cable direction, making it easier to plug in. The new connector is smaller and thinner design, but drive higher power output capacity to USB device. SUNIX USB2312C supports 5VDC@1500mA power output to USB device with over current protection on each USB port. This card is an ideal choice for external storage devices, digital cameras, webcam, video devices, and all other USB electronic devices.

Introduction

SUNIX USB2312C is a 2 port SuperSpeed+ USB 3.1 PCI Express card, and it’s compliant with the PCI Express Revision 2.0 & 3.0 for host PC system. Based on USB Type-C pure DFP (Downstream Facing Port) mode, it works up to 10 Gbps for data transfer when connecting to USB 3.1 compliant peripherals, while maintaining compatibility with existing USB peripheral devices. USB 3.1 performance is 2 times faster than USB 3.0 and 20 times faster than USB 2.0 connectivity.
 
With USB Type-C Receptacle, SUNIX USB2312C sports reversible plug orientation and cable direction, which means that users will no longer need to be concerned with plug orientation/cable direction, making it easier to plug in. The new connector is smaller and thinner design, but drive higher power output capacity to USB device. SUNIX USB2312C supports 5VDC@1500mA power output to USB device with over current protection on each USB port. This card is an ideal choice for external storage devices, digital cameras, webcam, video devices, and all other USB electronic devices.

Features









Specifications

Hardware

BUS PCI Express Revision 2.0 & 3.0, Dual-Lane (x2)
Controller PCI Express USB 3.1 Host controller, Asmedia ASM3142
USB Standard eXtensible Host Controller Interface (xHCI) Rev1.1
IRQ & IO Assigned by System

USB Communication

Interface Universal Serial Bus 3.1 / 3.0 / 2.0 / 1.1
Speed SuperSpeed+(10Gbps), SuperSpeed(5Gbps), High Speed (480Mbps), Full Speed (12Mbps), Low Speed (1.5Mbps)
No. of Port 2-port
PCB Connector USB 3.1 USB Type-C port (Downstream Facing Port)
Protection ±15KV IEC61000-4-2 Air Gap Discharge
±4KV IEC61000-4-2 Contact Discharge

Power

Source PCI Express bus power
Output Capacity

USB Type-C Port : +5VDC / 1.5A
Note:
* USB Power Delivery Protocol does NOT support.
* Built-in over current protection on each USB port.
* Maximum total power output depends on the capacity of user’s power supply unit

Power Consumption 1.1 W @ 3.3V (board only without power output to USB device)

Driver Support

Windows Windows 7 (X86/X64)
Windows 8.x / 10 (X86/X64)/ 11(Windows in-box driver)
Linux Linux 4.6 or later

Environment

Operation Temperature 0 to 60°C (32 to 140°F)
Operation Humidity 5 to 95% RH
Storage Temperature -20 to 70°C (-4 to 158°F)

Regulatory Approvals

EMC CE, FCC, VCCI, BSMI
Green RoHS, CRoHS, WEEE

Physical Characteristics

PCB Dimension 80 x 68.5 mm
Bracket Standard 120 mm (Low Profile 80mm)
Bracket Space 1

Support

Download Manual

Manual USB2312C User manual
Version V1.0
Update 2016-12-28 16:06:23
Size 1.6MB

Download Datasheet

Datasheet USB2312C Datasheet

Download Driver

Driver USB3.1 Windows Inbox Driver
OS
Windows 11 64bit
Windows 10 32/64 bit
Windows 8.1 32/64 bit
Windows 8.0 32/64 bit
Windows Server 2022 64bit
Windows Server 2019 64bit
Windows Server 2016 64bit
Windows Server 2012 R2 64-bit
Windows Server 2012 64bit
Driver ASMUSBHost_V116541WHQL
Version 1.16.54.1
Update 2019-03-08 14:08:31
Size 11.4MB
OS
Windows 7 SP1 32/64 bit
Windows Server 2008 R2 SP1 64bit
Driver USB3.1 Linux Inbox Driver
OS
Linux 4.6 above
Back to top
返回頂部
返回頂部